CB 100

Art.-Nr : A50025

CB 100 cleans and degreases strongly contaminated components e.g. made of steel, stainless steel or non-ferrous metals. For the removal of strong contaminations, such as special greases that are difficult to remove, rubber marks, bitumen- and wax residues, oils and pastes. Due to its long service life, the cleaner is particularly suited for use in closed-loop systems, such as the BIO-CIRCLE parts washer or in the CLEAN BOX systems.

For manual and mechanical use
Long service life
Especially suited for use in closed-loop systems
Replacement of paraffin and solvents

Product Details

CB 100 is a water-based, low-foaming cleaner based on renewable raw materials. Its natural...more

Close menu

CB 100

CB 100 is a water-based, low-foaming cleaner based on renewable raw materials. Its natural active ingredients dissolve contaminations powerfully without pitting the surfaces.

It has a pleasant odour, it is solvent- and VOC-free, and it does not require labelling under the CLP Regulation, which makes it an effective alternative to solvents or paraffin.

In addition, it is low-foaming and has a long service life, this guarantees effective use in closed-loop systems. The cleaner can be used for a long time, and less waste is produced.

Therefore, CB 100 not only protects the employees but also the environment.

Moreover, the cleaner can be rinsed off with water without leaving residues, which makes it suitable, in addition to maintenance, also for applications in some sectors of the foodstuffs industry.

VOC-free
Nature Boost: based on renewable raw materials
No labelling required under the CLP Regulation
Low-foaming
Water-based, phosphate- and solvent-free cleaner
Strong dissolving power with constantly good cleaning performance
For the removal of strong contaminations, such as special greases that are difficult to remove, rubber marks, bitumen- and wax residues, oils and pastes

Technical specification

Label:	label-free
VOC content:	VOC-free
NSF-certified:	yes
Contamination:	corrosion protection light, corrosion protection overseas, dust and swarf, grease, Nicotine , oil, separating agents, rubber residues, smoke, soot
Secondary contamination:	foodstuffs
Test contamination:	wax
Material:	stainless steel, steel, Tiles
Check material compatibility:	aluminium, non-ferrous metal, plastics, rubber, varnished surfaces, wood, zinc-coated surfaces
Cleaner basis:	water-based alkaline
Mechanics:	Handreinigung, high-pressure parts washer, immersion bath, parts washer w/ brush, turbo 2-in-1 cleaning
Secondary mechanics:	automatic parts washing machine, ultrasound
Manual/automatic:	automatic, manual
NSF:	NSF
Gütesiegel:	Kennzeichnungsfrei, Nature Boost, NSF, VOC free!

For use at production sites and in workshops Applications in the maintenance of...more

Close menu

Field of application

For use at production sites and in workshops
Applications in the maintenance of engines and machinery
Suitable for use in the foodstuffs industry, being NSF-registered (reg. no. 146719; Category Code C1)

CB 100 is ready for use and suitable for manual and mechanical applications. The cleaner...more

Close menu

Usage

CB 100 is ready for use and suitable for manual and mechanical applications.

The cleaner can either be sprayed onto the parts to be cleaned and wiped off with a cloth, or it is poured into the cleaning system to be used.

For manual cleaning it already works at ambient temperature; for mechanical cleaning a temperature of 40°C/104°F is recommended.

In case of applications in the foodstuffs industry, after cleaning the surfaces should be rinsed with a sufficient amount of water.

Prior to cleaning aluminium-, plastic- and varnished surfaces a compatibility test is recommended in order to protect the material. As an alternative we recommend the CB 100 Alu cleaner that has been especially developed for the protection of aluminium surfaces.