STAR US 2Art.-Nr : A00553-2
The alkaline STAR US 2 cleaning concentrate is used in ultrasonic devices, primarily for removing residues of releasing agents and plastics. It is particularly suited for cleaning moulds and tools in the plastics and metalworking industry. The cleaning agent is universally applicable in removing e.g. cooling lubricants, carbon deposits, soot, tinder, oils, greases, and also dust and fingerprints.
- For use in ultrasonic devices
- REMOVES residues of releasing agents and plastics from tools and moulds
The STAR US 2 universal cleaning concentrate already works at ambient temperature and removes contaminations from alkali-resistant surfaces such as plastics, stainless steel or steel. It efficiently removes a variety of deposits, which makes it suitable for strong intensive cleaning (25 kHz) and also fine cleaning (45 kHz) in ultrasonic devices.
This means that smaller moulds or tools used in plastic injection moulding or in the metalworking industry can be cleaned effortlessly.
The cleaner is phosphate-free and VOC-reduced to facilitate a more eco-friendly cleaning.
- REMOVES oil, grease, soot, cooling lubricants, carbon deposits, tinder, and dust
- Already works at ambient temperature
- Water-based, alkaline cleaner
Related links to "STAR US 2"
Seals of approval
- Reduced volatile organic compounds
|Contamination:||corrosion protection light, dust and swarf, grease, Nicotine , oil, separating agents, smoke, soot|
|Secondary contamination:||corrosion protection light|
|Material:||Plastics, stainless steel, steel, Tiles|
|Check material compatibility:||non-ferrous metal, rubber, varnished surfaces|
|Cleaner basis:||water-based alkaline|
|Secondary mechanics:||immersion bath|
|Sicherheitsratschläge:||Eye Dam. 1, Skin Irrit. 2|
Field of application
- For use in the plastics and metalworking industry
- For use in maintenance
Depending on the degree of contamination of the tools and moulds, the STAR US 2 cleaner can be poured into the ultrasonic device as concentrate or diluted with water up to 1:40.
Optimal cleaning results can already be achieved at ambient temperature. The performance of the ultrasonic bath can be enhanced by increasing the temperature to 90 °C/194 °F max.
The cleaner should not be used as a concentrate on aluminium- and zinc coatings in order to protect the material. We recommend a compatibility test in an inconspicuous spot prior to the application.
Low application temperature, energy-saving, water-saving
From renewable raw materials, non-flammable, VOC-free, non-marking
Suitable for the food industry, miscible with water, can be rinsed without residue
Free from / reduced volatile organic compounds according to EU regulation