Article successfully added.

E-NOX Clean

A00141

Cleaning gel for removing mineral residues 

Water-based, acidic cleaning gel for removing limescale and rust from metal surfaces. Also adheres to perpendicular surfaces. 

  • Brightens stainless steel, aluminium and non-ferrous metals without affecting the basic metal 
  • Contains neither hydrofluoric nor nitric nor hydrochloric acid 
  • VOC-reduced

Bitte Variante wählen:

Product Details

Highly effective, ready-to-use cleaning gel (can be diluted with water up to 1:40; the gel-like,...more
E-NOX Clean

Highly effective, ready-to-use cleaning gel (can be diluted with water up to 1:40; the gel-like, viscous consistency of the cleaner will decrease as water is added though) for removing mineral residues, such as limescale- and cement residues, extraneous rust, and also light grease- and oil contaminations. Brightens stainless steel, aluminium and non-ferrous metals without affecting the basic metal. Non-corrosive on iron, V2A steel, non-ferrous metals and aluminium; will not dissolve gypsum- and silicate deposits. The cleaning gel adheres very well to perpendicular surfaces, screens, rollers, etc. This way, the active ingredients can work optimally, and the contaminations are dissolved without scrubbing or scouring, and removed without leaving scratches. 

The gel can also be used in the food industry. It can be removed without residues after rinsing with water. According to the German Food, Consumer Goods and Feed Code (LFGB), the cleaner may be used in food-processing companies. It helps fulfil the high demands of the VOC Solvents Directive (DE: 31. BImSchV, AT: VOC-Anlagen-Verordnung – VAV): the limit values do not apply to cleaners with a solvent content of less than 20%. 

  • Water-based, acidic cleaning gel 
  • Removes limescale- and cement residues, extraneous rust, and also light grease- and oil contaminations
  • Can be diluted with water up to 1:40 
  • Brightens stainless steel, aluminium and non-ferrous metals without affecting the basic metal 
  • Removes flash rust from stainless steel 
  • Contains neither hydrofluoric nor nitric nor hydrochloric acid 
  • Non-flammable 

Related links to "E-NOX Clean"

Tips & Hints

E-NOX Clean for bikers: Clean stainless steel exhaust systems, rims and spokes quickly and easily. Brush on, work in with a brush if necessary, leave to act for approx. 10 min, rinse off, done!

Seals of approval
the cleaner can be mixed with water and is therefore very economical
the cleaner is ready-to-use
unlabelled according to CLP-regulations
Reduced volatile organic compounds
Technical specificationmore

Technical specification

Label: Labelled
VOC content: VOC-reduced
NSF-certified: no
Contamination: limescale, mineral deposits, rust, oxidation, tarnishing
Material: aluminium, Plastics, stainless steel, steel, tiles
Check material compatibility: non-ferrous metal, rubber, varnished surfaces, wood
Cleaner basis: water-based acidic
Mechanics: manual cleaning
Manual/automatic: manual
Concentrate: dilutable, ready to use
Seal of approval: miscible with water, Ready-To-Use, unlabelled, VOC reduced!
Safety advice: Eye Dam. 1, Met. Corr. 1, Skin Irrit. 2
Universally applicable in the industry and craft sector  Suitable for the cleaning of...more

Field of application

  • Universally applicable in the industry and craft sector 
  • Suitable for the cleaning of e.g. heating coils, piping, boilers, steam-jet degreasers, washing machines, acid-resistant stone floors and wall tiles 
  • For basic cleaning after mounting stainless steel façade parts, doors, portals, window frames, shop window profiles etc. in order to remove harmful builder’s dirt thoroughly 
  • Maintenance of stainless steel surfaces, in particular in environments prone to accumulation of chlorides and sulphur dioxide (e.g. near the coast) 

Expert tip for bikers: E-NOX Clean for bikers: effortless and fast cleaning of stainless steel exhaust systems, rims and spokes. Brush it on, rub it in with a brush if necessary, and rinse it off after 10 min exposure time. Finished!

The perfect mixture! Cleaners Miscibility ↓ with water with...more

Usage

The perfect mixture!
Cleaners Miscibility
with water with manual use
E-NOX Care no pure
E-NOX Clean yes 30 % - 100 %
E-NOX-I no pure
E-NOX Shine no pure

Other Recommendations

Viewed

OUR BADGES
Low application temperature, energy-saving, water-saving

Low application temperature, energy-saving, water-saving

For us, sustainability means taking responsibility

For us, sustainability means taking responsibility

From renewable raw materials, non-flammable, VOC-free, non-marking

From renewable raw materials, non-flammable, VOC-free, non-marking

Suitable for the food industry, miscible with water, can be rinsed without residue

Suitable for the food industry, miscible with water, can be rinsed without residue

Free from / reduced volatile organic compounds according to EU regulation

Free from / reduced volatile organic compounds according to EU regulation

x