UNO XArt.-Nr : A02003
UNO X is the gel foam cleaner for manual use in the UNO range. It is suitable for the most stubborn soiling, even on vertical surfaces, and is perfect for the Foam Injector.
After a short exposure time, even the heaviest soiling can be removed.
- REMOVES oils, oil carbon, greases, soot and strongly adhering environmental contaminants
- CLEANS steel, stainless steel, etc.
- Long contact time possible → stable foam
- High yield, for mixing ratio cf. Application
UNO X is a water-based, VOC-reduced intensive cleaner with strong, solid foam formation. Its highly effective formula is ideal for removing oil, oil carbon, grease, soot and strongly adhering environmental soiling.
Due to its strong foam formation, UNO X is ideally suited for cleaning large, even sloping surfaces, such as the exterior of locomotives, attached trailers, lorries, etc.
In addition to the application with the Foam Injector, UNO X can also be used in immersion processes.
Related links to "UNO X"
Seals of approval
- the cleaner can be mixed with water and is therefore very economical
- the cleaner is ready-to-use
- Reduced volatile organic compounds
|Contamination:||burnt-in organic contaminations, dust and swarf, foodstuffs, grease, nicotine , oil, separating agents, smoke, soot|
|Material:||Plastics, stainless steel, steel, tiles|
|Check material compatibility:||rubber, varnished surfaces|
|Cleaner basis:||water-based alkaline|
|Mechanics:||foam unit, manual cleaning|
|Concentrate:||dilutable, ready to use|
|Seal of approval:||miscible with water, Ready-To-Use, VOC reduced!|
|Safety advice:||Eye Dam. 1, Met. Corr. 1, Skin Corr 1A|
Field of application
For removing heavy contamination from large, also vertical, surfaces.
Typical areas of application: Transport/logistics industry, automotive and construction industry
|Cleaners||Miscibility||Use with parts washers||Mixing ratios for applications in application systems|
|↓||with water||for manual use||CLEAN BOX||Foam injector||stainless steel foam sprayer||Foam sprayer|
|UNO S F||yes||2,5 % - 100 %||2,5 % - 10 %||-||-||-|
|UNO S PF||yes||2,5 % - 100 %||2,5 % - 10 %||-||-||-|
|UNO S V||yes||30 % - 100 %||-||40 % - 60 %||40 % - 60 %||40 % - 100 %|
|UNO W||yes||2,5 % - 100 %||2,5 % - 10 %||-||-||-|
|UNO AV||yes||30 % - 100 %||2,5 % - 10 %||30 % - 100 %||30 % - 100 %||-|
|UNO X||yes||recommended for foam injector||2,5 % - 50 %||30 % - 100 %||-||-|
Low application temperature, energy-saving, water-saving
For us, sustainability means taking responsibility
From renewable raw materials, non-flammable, VOC-free, non-marking
Suitable for the food industry, miscible with water, can be rinsed without residue
Free from / reduced volatile organic compounds according to EU regulation