Stripper Gel
Art.-Nr : A00556Bio-Circle Stripper Gel is a viscous mixture of solvents for the removal of paint and coatings. It can be applied on metal, wood, stone, concrete, glass, plastics, tiles, and clinker bricks for the removal of e.g. graffiti, adhesive residues, soot particles, and varnish.
- Highly viscous gel mixture of solvents
- Low labelling, halogen-free
- Easy and safe to use
Product Details
The highly viscous cleaning gel even adheres to perpendicular surfaces. This means that Bio-Circle Stripper Gel can e.g. be used on metal, wood, stone, concrete, glass, plastics, tiles, and clinker bricks. It can be used to remove the following contaminations:
- Paint and coatings
- Graffiti
- Adhesive residues,
- Burnt-in soot particles
- Resins
- Varnish
- Grout (two-component epoxy-based sealant)
It has a low labelling with an exclamation mark (GHS07) and is halogen-free.
The gel is simply applied to the contamination and removed after an appropriate exposure time. For more details, please refer to the “Application” tab.
The product characteristics at a glance:
- Highly viscous gel mixture of solvents
- Can be used on metal, wood, stone, concrete, glass, plastics, tiles, and clinker bricks
- Removes paint and coatings, graffiti, adhesive residues, soot particles, resins, varnish, and grout (two-component epoxy-based sealant)
- Low labelling, halogen-free
- Easy and safe to use
Related links to "Stripper Gel"
Seals of approval
- the cleaner is ready-to-use
- Reduced volatile organic compounds
Technical specification
| Label: | Minor label |
| VOC content: | VOC-reduced |
| NSF-certified: | no |
| Contamination: | paint, varnish |
| Material: | stainless steel, steel, tiles |
| Check material compatibility: | plastics, rubber |
| Cleaner basis: | solvent |
| Mechanics: | manual cleaning |
| Manual/automatic: | manual |
| Concentrate: | ready to use |
| Seal of approval: | Ready-To-Use, VOC reduced! |
| Safety advice: | Acute Tox. 4, Eye Irrit. 2, Skin Irrit. 2 |
Field of application
Thanks to its structure, Bio-Circle Stripper Gel is universally applicable for the removal of contaminations from surfaces, both indoors and outdoors. The low labelling reduces the hazard for the user.
Usage
Carrying out a material compatibility test in a less visible spot is recommended.
Then simply apply Bio-Circle Stripper Gel at ambient temperature by means of a paintbrush, wide brush or squeegee to the contamination in a layer of approx. 1 – 3 mm. Thanks to its viscosity, it also adheres to perpendicular surfaces. After application, it is best to cover the gel with a film in order to prevent drying or, when used outdoors, washing away by rainwater. After an exposure time of 10 – 24 hours, remove the gel with the aid of light mechanics (e.g. with a coconut fibre brush or a cloth).
If the result is satisfactory, just rinse with water; if not, apply once more and repeat the process.
Other Recommendations
Viewed
-
-
Low application temperature, energy-saving, water-saving
-
For us, sustainability means taking responsibility
-
-
From renewable raw materials, non-flammable, VOC-free, non-marking
-
-
Suitable for the food industry, miscible with water, can be rinsed without residue
-
-
Free from / reduced volatile organic compounds according to EU regulation