Usage
The CLEAN BOX consists of an immersion basket that is inserted in the immersion box. The system can be closed with the lid in order to protect the cleaning bath during the cleaning process or the Box during storage from contaminations.
The cleaning fluid is poured into the immersion box, and the contaminated parts are lowered into it by means of the immersion basket. Then they can be pre-cleaned, degreased or derusted manually. The Box can also be used for soaking.
For these processes, the CB 100, GS 200 or BIO-RUST cleaners are particularly well suited. After cleaning, rinsing the work pieces with water is recommended.
Upon completion of the cleaning process, the basket is easy to lift and can be placed on the inside edge of the immersion box, performing a 180° turn. This way, the individual parts can drain and then be taken out.
The cleaning fluid remaining in the Box is ready to be used another time.
The CLEAN BOX can be stacked in a steadfast way, facilitating the setup of several cleaning baths at the same time and saving additional space.
Tips:
- Degreasing with CB 100
- Removal of special greases and waxes with GS 200
- Removal of old varnish and paint with GS 200
- Neutral derusting with BIO-RUST
- Dewatering with OMNI
- Removal of white rust with Limescale Barracuda
- Rinsing bath with Corrosion protection for water-based systems