CLEANING SOLUTIONS
Plastics Processing
Optimize your plastics processing operations now and increase your production efficiency.
Cooling Channels
PROBLEMS
Cycle phases too long
Can be attributed to contaminated cooling channels – these impurities are a gradual process and reduce the output volume step by step, leading to lost revenue.
Temperature fluctuations
Temperatures that are too high or too low lead to a reduction in the quality of the end product and increase the scrap rate of production.
Decreasing cooling capacity
Cooling performance can drop due to clogged channels, causing dimensional instability of the parts.
CAUSES
Limescale deposits
Circulated water is rarely free of limescale. Increased temperatures promote limescale buildup.
Corrosion deposits
Cooling channels are often made of materials susceptible to corrosion, making rust another challenge.
Biofilms
More rarely, slime layers known as biofilms can also develop as contamination.
SOLUTIONS
Exterior cleaning of injection molding machines
Surface pre- and post-treatment with almost residue-free cleaner
✔ Removes medium oils and greases, abrasion, grinding dust, release agents, etc.
✔ Suitable for stainless steel, steel, tiles, plastic, and galvanized surfaces
✔ Cleaning before painting, gluing, labeling, or coating
Regular cleaning of cooling channels
RWR KST cleaning system for cooling channels in plastic injection molds
✔ Cleans internal circuit systems in plastic injection molds
✔ Automatic cleaning with PLC control without disassembly
✔ Integrated rinsing device: For corrosion protection and optimal cleaning
FT 200
from € 12.60 net | from € 6.65 / liter
ab 12,60 €14,99 € 25,20 €29,99 € / Liter excl. VAT zzgl. Versandkosten nettobrutto 25,20 €29,99 € / Liter excl. VAT zzgl. Versandkosten Select options
Suitable Products
The RWR 80 L pipe and heat exchanger cleaner is the ideal solution for cleaning...
excl. 19% VAT
zzgl. Versandkosten
The RWR 80 L KST Dual Automatic is the ideal solution for cleaning cooling circuits...
excl. 19% VAT
zzgl. Versandkosten
The RWR 80 L KST fully automatic PLC is specially designed for the efficient cleaning...
excl. 19% VAT
zzgl. Versandkosten
The RWR 300 L pipe and heat exchanger cleaner offers an efficient and simple solution...
excl. 19% VAT
zzgl. Versandkosten
Other container sizes available
FT 200 is a ready-to-use, surfactant-free cleaning agent, ideal for surface pre-treatment and final cleaning....
excl. VAT
zzgl. Versandkosten
Inhalt: 0,5 Liter – 1000 Liter
25,20 €29,99 € / Liter
Other container sizes available
POWER CLEANER KST 2.0 is a low-foaming high-performance cleaning agent, specially developed for machine use...
excl. VAT
zzgl. Versandkosten
Inhalt: 20 Liter – 200 Liter
8,00 €9,52 € / Liter
Other container sizes available
FT 100 is a surfactant-free cleaning agent, ideal for surface pre-treatment and final cleaning. Perfectly...
excl. VAT
zzgl. Versandkosten
Inhalt: 0,5 Liter – 1000 Liter
22,60 €26,89 € / Liter
Other container sizes available
FT 300 is a ready-to-use, surfactant-free cleaning agent, ideal for surface pre-treatment and final cleaning....
excl. VAT
zzgl. Versandkosten
Inhalt: 0,5 Liter – 1000 Liter
25,20 €29,99 € / Liter
Tools and Parts
PROBLEMS
Unusable mold inserts
Gas can only escape during production in clean mold inserts, preventing burn marks.
Decreasing productivity
Dirty mold inserts and extruder screws impair the manufacturing process.
Screw contamination
Burnt-on plastic residues limit the functionality of the extruder screw, which is essential for smooth production.
SOLUTIONS
Cleaning of mold inserts
In the hot-water parts washing machine – to ensure high productivity and quality.
Pre-treatment of tools
The HP Vigo effectively removes stubborn contamination with high pressure.
Cleaning the extruder screw
Whether automatically with an ultrasonic cleaning device or manually – with CB 100 and its variants, every turn becomes clean. CB 100 is available as an additional product with an aluminum protective formula and low residue. There is a solution for every application.
Suitable Products
Other container sizes available
The CB 100 Alu cleaning and degreasing agent is the ideal solution for thorough cleaning...
excl. VAT
zzgl. Versandkosten
Inhalt: 0,5 Liter – 1000 Liter
25,70 €30,58 € / Liter
The HTW Basic Eco is a robust hot water parts washer that reliably cleans even...
excl. 19% VAT
zzgl. Versandkosten
Other package sizes available
CB 100 is the cold cleaner alternative! With its extreme dissolving power, the cleaning agent...
excl. VAT
zzgl. Versandkosten
Inhalt: 0,5 Liter – 1000 Liter
24,40 €29,04 € / Liter
The HTW Max Eco is a maintenance-friendly high-pressure spray system with a three-dimensional nozzle system...
excl. 19% VAT
zzgl. Versandkosten
HTW Bio is a powerful hot water parts washer that cleans components and tools safely...
excl. 19% VAT
zzgl. Versandkosten
Other container sizes available
Master Mould 100 is a water-based ultrasonic cleaning agent that has been specially developed for...
excl. VAT
zzgl. Versandkosten
Inhalt: 20 Liter – 1000 Liter
9,40 €11,19 € / Liter
The BC-Sonic 25/45 ultrasonic cleaning device is ideal for the effective cleaning of parts with...
excl. 19% VAT
zzgl. Versandkosten
The BC-Sonic 25/45 ultrasonic cleaning device is ideal for the effective cleaning of parts with...
excl. 19% VAT
zzgl. Versandkosten
Pad Printing
PROBLEMS
Ink residues
After every production process in pad printing, ink residues remain on ink-contact surfaces such as the pad, plate, doctor blade, knife, and mixer. These ink residues can prevent the tools from functioning properly.
Limited printer function
Due to ink residues, subsequent printing processes cannot be performed correctly. Particularly during a color change, these ink residues can mix, leading to undesirable color gradients and deviations.
SOLUTIONS
In-between cleaning
FT 300 – for quick removal of ink that is still wet.
Main cleaning
PROLAQ Compact with PROLAQ L 400
Ink-contact surfaces in pad printing are cleaned – such as the pad, plate, doctor blade, knife, and mixer.
Pad printing parts that have direct contact with ink application/printing on the injection-molded plastic parts.
Suitable Products
The green lid protects against contamination, minimizes fluid evaporation, improves safety, reduces waste, and extends...
excl. 19% VAT
zzgl. Versandkosten
Other container sizes available
PROLAQ L 300 is a water-based, neutral cleaning agent that has been specially developed for...
excl. VAT
zzgl. Versandkosten
Inhalt: 0,5 Liter – 200 Liter
33,60 €39,98 € / Liter
Other container sizes available
PROLAQ L 500 is a powerful paint remover that has been specially developed for the...
excl. VAT
zzgl. Versandkosten
Inhalt: 0,5 Liter – 1000 Liter
34,00 €40,46 € / Liter
The PROLAQ Compact is an innovative cleaning system for manually removing paint from flow cup...
excl. 19% VAT
zzgl. Versandkosten
Other container sizes available
FT 200 is a ready-to-use, surfactant-free cleaning agent, ideal for surface pre-treatment and final cleaning....
excl. VAT
zzgl. Versandkosten
Inhalt: 0,5 Liter – 1000 Liter
25,20 €29,99 € / Liter
The PROLAQ Auto offers an effective solution for manual and automatic cleaning of paint application...
excl. 19% VAT
zzgl. Versandkosten
Other packaging sizes available
Paint remover for water-based and solvent-based paints ✔ Removes primarily solvent-based and water-based paints and...
excl. VAT
zzgl. Versandkosten
Inhalt: 0,5 Liter – 1000 Liter
33,90 €40,34 € / Liter
Other container sizes available
Master Mould 100 is a water-based ultrasonic cleaning agent that has been specially developed for...
excl. VAT
zzgl. Versandkosten
Inhalt: 20 Liter – 1000 Liter
9,40 €11,19 € / Liter
Contact
We support you!
Do you have questions or need further information? Do not hesitate to contact us by phone or email. Our team is at your disposal and looks forward to assisting you with help and advice.
Contact
Your Bio-Circle Team
can be reached free of charge.
Tel.: +49 (0)5241 9443-0
Mail: kontakt@bio-circle.de
We are here for you!
Monday – Thursday
7:30 am to 4:30 pm
Friday
7:30 am to 3:00 pm