Startseite » Products » E-NOX Clean

E-NOX Clean

SKU: A00141

Removes mineral deposits — even on vertical metal surfaces.

  • Thoroughly removes limescale, cement residue and foreign rust.
  • Brightens stainless steel, aluminum and non-ferrous metals.
  • Thanks to its gel consistency, it targets deposits even on vertical surfaces.

This product is available in various packaging sizes.

E-NOX Clean - HDPE Bottle 1000 ml

E-NOX Clean - HDPE Bottle 1000 ml

E-NOX Clean - Jerrycan 20 l

E-NOX Clean - Jerrycan 20 l

E-NOX Clean - Plastic Barrel 200 l

E-NOX Clean - Plastic Barrel 200 l

Product details

Description

Effectively remove mineral deposits, even on vertical surfaces

Thoroughly remove limescale, cement residue and foreign rust from metal surfaces — even on vertical components. E-NOX CLEAN adheres to the surface as a cleaning gel, allowing for longer and more targeted action against mineral deposits.

This aqueous, acidic cleaning gel removes limescale, cement residue and foreign rust, as well as light grease and oil stains. At the same time, it is suitable for brightening stainless steel, aluminum and non-ferrous metals without attacking the base metal.

E-NOX CLEAN is ready to use and can be diluted with water up to a ratio of 1:40, depending on the application. As the dilution increases, the gel-like consistency decreases. This allows the cleaner to be flexibly adapted to various cleaning tasks.

The formulation contains no hydrofluoric, nitric or hydrochloric acid and is low in VOCs. E-NOX CLEAN is non-flammable and non-corrosive to iron, V2A steel, non-ferrous metals and aluminum. After use, the cleaner can be removed without leaving any residue by thoroughly rinsing with water and is suitable for relevant applications in the food industry.

Your Benefits with E-NOX CLEAN

  • Thoroughly dissolves mineral deposits — removes limescale, cement residue and foreign rust
  • Effectively cleans vertical surfaces as well — the gel consistency allows for a longer contact time
  • Visibly brightens metal surfaces — suitable for stainless steel, aluminum and non-ferrous metals
  • Flexibly adjust cleaning intensity — ready to use or dilutable with water up to a 1:40 ratio
  • Also removes light grease and oil stains
  • Formulated without hydrofluoric, nitric or hydrochloric acid
  • Rinses off without leaving residue after cleaning
  • Low in VOCs and non-flammable
AluminiumDrehkreuz

Aluminium Checker Plate

Brighten Aluminium Checker Plate with E-Nox Clean - simply apply, let sit, and wipe off

Aluminium - Aluminium Checker PlateAluminium - Aluminium Checker Plate

Clean Turnstile

Brighten Turnstile with E-Nox Clean

Drehkreuz - Clean TurnstileDrehkreuz - Clean Turnstile



 -
Manual-automatic

manual

Types of contamination

Cement haze, External Rust, Heavy Deposits, Mineral & Lime Deposits, Oil & Grease

Material

Aluminum, Base metals, Steel / Stainless Steel

Machanics

Manual (Hand Wash)

Labeling

labeled

Cleaner base

watery-sour

Seal of Approval

Mixable with water, Ready-to-use, VOC Reduced

VOC

VOC-reduced

Water hazard class

1

Saftey advice

Eye Dam. 1, Met. Corr. 1, Skin Irrit. 2

  • Can be used universally in industry and trade
  • Suitable for cleaning e.g. heating coils, pipes, boilers, steam jets, washing machines and acid-resistant stone floors and wall tiles
  • For basic cleaning after the installation of stainless-steel façade parts, doors, portals, window frames, shop window profiles, etc. to thoroughly remove harmful building dirt
  • In the maintenance of stainless-steel surfaces, especially in environments where chlorides and sulphur dioxide can be concentrated (e.g. near the coast)
  • Expert tip for bikers:rnE-NOX Clean for bikers: Clean stainless-steel exhaust systems, rims and spokes quickly and easily. Brush on, work in with a brush if necessary, leave on for approx. 10 minutes, rinse off, done!

Das sagen unsere Kunden

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “E-NOX Clean”

Your email address will not be published. Required fields are marked *

FAQs

What types of stains does E-NOX CLEAN remove?
E-NOX CLEAN is suitable for removing limescale, cement residue, foreign rust and light grease and oil stains.
Why is E-NOX CLEAN particularly suitable for vertical surfaces?
Thanks to its gel-like consistency, E-NOX CLEAN adheres even to vertical surfaces. This allows the cleaner to act specifically on the soiled surface.
For which metals is E-NOX CLEAN suitable?
E-NOX CLEAN is suitable for stainless steel, aluminum and non-ferrous metals, among others and can also brighten these surfaces.
Can E-NOX CLEAN be diluted?
Yes. The product is ready to use, but depending on the application, it can be diluted with water up to a ratio of 1:40. As the dilution increases, the gel-like consistency decreases.
Does E-NOX CLEAN contain hydrofluoric, nitric or hydrochloric acid?
No. The formulation contains neither hydrofluoric, nitric nor hydrochloric acid.
Is E-NOX CLEAN corrosive to metals?
According to the product specifications, E-NOX CLEAN is not corrosive to iron, V2A steel, non-ferrous metals or aluminum.
Can E-NOX CLEAN be removed without leaving any residue?
Yes. After cleaning, E-NOX CLEAN can be removed from the surface without leaving any residue by thoroughly rinsing with water.
Is E-NOX CLEAN suitable for the food industry?
E-NOX CLEAN is suitable for appropriate cleaning applications in the food industry, provided that the cleaned surfaces are thoroughly rinsed with water afterward.