Startseite » Products » Remove AD(hesive) 200

Remove AD(hesive) 200

SKU: A020740

Removes stubborn adhesive residue — even in crevices and hard-to-reach areas.

  • Removes cured adhesives, sealants, hot melt adhesives and epoxy adhesives.
  • Loosens label residue, resin, tar, and rubber residue with a single cleaner.
  • Penetrates deep into stubborn dirt thanks to its excellent creeping properties.

This product is available in various packaging sizes.

Remove AD(hesive) 200 - Jerrycan 20 l

Remove AD(hesive) 200 - Jerrycan 20 l

Remove AD(hesive) 200 - IBC 1000 l

Remove AD(hesive) 200 - IBC 1000 l

Remove AD(hesive) 200 - Plastic Barrel 200 l

Remove AD(hesive) 200 - Plastic Barrel 200 l

Remove AD(hesive) 200 - PET (Recycled) Bottle 500ml with Sprayer

Remove AD(hesive) 200 - PET (Recycled) Bottle 500ml with Sprayer

Remove AD(hesive) 200 - 20 rPET bottles of 500 ml + 10 sprayers

Remove AD(hesive) 200 - 20 rPET bottles of 500 ml + 10 sprayers

Product details

Description

Removing cured adhesives and sealants from components and surfaces

Remove stubborn adhesive residue, cured sealants and label residue without having to use a separate specialty cleaner for every type of contamination. Remove AD(hesive) 200 dissolves various sticky residues and is suitable for manual cleaning as well as for use in ultrasonic cleaning machines.

The cleaner removes labels and label residue, cured adhesives and sealants, hot melt adhesives, epoxy adhesives, resin, tar and rubber residue. As a result, Remove AD(hesive) 200 covers a wide range of cleaning tasks in production, maintenance and repair.

Thanks to its excellent creeping properties, the cleaner penetrates deep into stubborn contaminants.

Remove AD(hesive) 200 is suitable for appropriate surfaces made of plastic, metal, aluminum and copper. The cleaner is water-based, mildly alkaline and low in VOCs.

Your Benefits with REMOVE AD(hesive) 200

  • Dissolves cured adhesive and sealant residues – for demanding cleaning tasks on parts and components
  • Removes various adhesive residues with a single cleaner – suitable for hot melt adhesives, epoxy adhesives and other cured adhesives
  • Remove labels and stubborn adhesive residues – for cleaning prior to reuse or further processing
  • Also removes resin, tar, and rubber residues – versatile for use in maintenance and repair
  • Better reach deep-seated contaminants – good creeping properties aid penetration into adhering residues
  • Clean complex components in an ultrasonic bath – for areas that are difficult to reach manually
  • Treat various materials – suitable for plastic, metal, aluminum and copper
  • Clean manually or mechanically – flexibly adaptable to different cleaning tasks
  • Water-based, mildly alkaline and low in VOCs
  • Made from renewable raw materials
Manual-automatic

automatic, manual

Types of contamination

Caked-on dust, Cured adhesives, Hot-melt and epoxy adhesives, Labelling residues, Resins, Rubber, Sealant

Material

Aluminum, Brass, Galvanized Surfaces, Metals, Non-ferrous metals, Steel / Stainless Steel

Machanics

Manual (Hand Wash), Order Systems, Ultrasonic

Cleaner base

water-based alkaline

Seal of Approval

Nature Boost, Ready-to-use, VOC Reduced

VOC

VOC-reduced

Water hazard class

2

Saftey advice

Aquatic Chronic 3, Skin. Sens. 1

Labeling

lightly labeled

  • Food industry, automotive, trade etc.
  • Wherever adhesives are used or films need to be removed

Das sagen unsere Kunden

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Remove AD(hesive) 200”

Your email address will not be published. Required fields are marked *

FAQs

How can you remove cured adhesive from metal?
Cured adhesive residue can be dissolved using a suitable adhesive remover. Remove AD(hesive) 200 removes cured adhesives from suitable metal surfaces and has good creeping properties, allowing it to reach even deep-seated residue.
How do you remove cured sealant from components?
Remove AD(hesive) 200 is suitable for removing cured sealant from compatible components made of metal, aluminum, copper and plastic. The cleaner penetrates the adhering residue, thereby helping to loosen it.
How can you remove stubborn labels and adhesive residue?
Remove AD(hesive) 200 dissolves labels as well as the adhesive residue left beneath them. This makes the cleaner suitable, for example, for parts or components from which old markings and their adhesive residue need to be removed.
Which cleaner is suitable for removing epoxy adhesive?
According to the product specifications, Remove AD(hesive) 200 is also suitable for removing epoxy adhesive. Thanks to its creeping properties, the cleaner can penetrate adhering adhesive residues and help loosen them.
How can hot glue be removed from metal or plastic?
Remove AD(hesive) 200 is suitable for removing hot glue from suitable metal and plastic surfaces. Residues of other adhesives and sealants can also be treated with the same cleaner.
Which adhesive remover is suitable for plastic, aluminum and copper?
Remove AD(hesive) 200 can be used on suitable plastic, metal, aluminum and copper surfaces. For sensitive or unknown materials, compatibility should be tested in advance on an inconspicuous area.
How do you remove resin, tar or rubber residues from components?
In addition to adhesives and sealants, Remove AD(hesive) 200 also removes resin, tar and rubber residues from suitable surfaces. This makes the cleaner suitable for use on various types of stubborn contaminants in maintenance and production.
Can adhesive residues be removed in an ultrasonic bath?
Yes. Remove AD(hesive) 200 is suitable for use in ultrasonic cleaning devices. This allows even complex-shaped components and hard-to-reach areas with adhesive or sealant residues to be treated.
Which cleaner is suitable for hard-to-reach adhesive residues?
Remove AD(hesive) 200 has good creeping properties and can therefore penetrate deep into adhering contaminants and hard-to-reach areas. This aids in cleaning stubborn adhesive, resin or sealant residues.
Is there a water-based adhesive and sealant remover?
Yes. Remove AD(hesive) 200 is water-based, slightly alkaline and low in VOCs. The cleaner can be used both manually and in suitable ultrasonic cleaning machines.