Article successfully added.

Die-Casting Mould Cleaner

E02017

For regular intermediate cleaning of aluminium die-casting moulds and other non-ferrous metal die-casting processes.

  • Non-flammable 
  • Excellent cleaning efficiency 
  • Good compatibility with commercial releasing agents 

Product sizes

plastic jerrican 20 L

metal drum 200 L

IBC 1000 L

 

Product Details

The Die-Casting Mould Cleaner serves for the removal of aluminium- and releasing agent residues...more
Die-Casting Mould Cleaner

The Die-Casting Mould Cleaner serves for the removal of aluminium- and releasing agent residues from die-casting moulds. The product stands out for its high yield and associated low consumption. Staff exposure to fumes will be minimized. Regular application of the ready-to-use product in intermediate cleaning will shorten the final cleaning process, which will in turn reduce downtimes and increase productivity and product quality. Der Die-Casting Mould Cleaner simultaneously preserves the moulds and is compatible with commercial releasing agents. 

  • Non-flammable 
  • Excellent cleaning efficiency 
  • Good compatibility with commercial releasing agents 
  • Very economical – low consumption 
  • Staff exposure to fumes will be reduced 
  • Optimal intermediate cleaning with simultaneous preservation of moulds 

Related links to "Die-Casting Mould Cleaner"

Seals of approval
Reduced volatile organic compounds
Technical specificationmore

Technical specification

Label: Labelled
Contamination: Bitumen, heavy greases, crude oil, carbonized organic contaminations, Dust, fingerprints, light residues, Oil, grease, dirt, synthetic oils and greases, wax
Material: aluminium, Castings, Iron, non-ferrous metals, Steel/stainless steel, Varnished surfaces, zinc-coated surfaces
Mechanics: immersion bath, manual cleaning, manual cleaning on vertical surfaces
Seal of approval: VOC reduced!
Safety advice: Asp. Tox. 1
For aluminium die-casting foundries  For the removal of releasing agent residues ...more

Field of application

  • For aluminium die-casting foundries 
  • For the removal of releasing agent residues 
  • Intermediate cleaning of aluminium die-casting moulds 
Depending on the degree of contamination, apply the Die-Casting Mould Cleaner to the mould using...more

Usage

Depending on the degree of contamination, apply the Die-Casting Mould Cleaner to the mould using a hard brush or a cotton cloth. For good cleaning performance, the mould should have a slight residual heat of 90°C/194°F max. After application blow the mould out with compressed air. 

Viewed

OUR BADGES
Low application temperature, energy-saving, water-saving

Low application temperature, energy-saving, water-saving

For us, sustainability means taking responsibility

From renewable raw materials, non-flammable, VOC-free, non-marking

From renewable raw materials, non-flammable, VOC-free, non-marking

Suitable for the food industry, miscible with water, can be rinsed without residue

Suitable for the food industry, miscible with water, can be rinsed without residue

Free from / reduced volatile organic compounds according to EU regulation

Free from / reduced volatile organic compounds according to EU regulation

X