Multi CleanArt.-Nr : A10124
The highly concentrated biological general purpose cleaner powerfully removes contaminations of all kinds and can be used on a huge variety of materials. The all-rounder removes widely varying contaminations, such as oil, soot, ink or bitumen- and tar spatter, from surfaces like e.g. metal, plastics, wood, natural stone or glass. The cleaner can be used in manual as well as in mechanical applications.
- Water-based, alkaline cleaner
- Universally applicable, manually and mechanically
- For the removal of grease, oil, resin, nicotine, ink, insect speck, blood, bitumen- and tar spatter, etc.
Multi Clean is universally applicable. It effectively removes greases, oils, waxes, and resins, but also algae, mould, soot or insect speck.
Contaminations caused by pencil, ballpoint pen, felt pen or ink are dissolved as well. Coffee- and tea stains, shoe polish, nicotine or bitumen- and tar spatter can be removed. Even blood can be removed effectively.
The cleaner is an all-rounder and can be applied to a variety of materials. This includes surfaces made of wood, rubber, natural stone, metal and plastics. It cleans glass, varnish, ceramics, and porcelain, too, and it is also suitable for textiles, carpets and upholstery.
Cleaning power can be increased by heating up the cleaner. The water-based cleaner cleans gently because it is phosphate-free and VOC-reduced.
- Non-flammable and non-abrasive
Related links to "Multi Clean"
Seals of approval
- Reduced volatile organic compounds
|Contamination:||corrosion protection light, dust and swarf, foodstuffs, grease, Nicotine , oil, separating agents|
|Secondary contamination:||burnt-in organic contaminations|
|Material:||Plastics, stainless steel, steel, Tiles, Wood|
|Check material compatibility:||aluminium, non-ferrous metal, rubber, varnished surfaces, zinc-coated surfaces|
|Cleaner basis:||water-based alkaline|
|Mechanics:||floor cleaning equipment & pressure washers, immersion bath, manual cleaning|
|Sicherheitsratschläge:||Eye Dam. 1, Skin Irrit. 2|
Field of application
- Applications in all industrial companies and workshops, and also in the leisure sector
- Suitable for use in wet extraction devices for carpets
Depending on the application and contamination level, Multi Clean is used either as a concentrate of diluted with water to 1:40.
It can then be applied to the contaminated surfaces and, after a short exposure time, rinsed off with plenty of water or wiped off with a damp cloth. Cleaning can be supported manually with a brush or a cloth.
The cleaner already works at ambient temperature; however, the cleaning time can be shortened by increasing the temperature.
Carrying out a compatibility test on sensitive surfaces and on textiles, carpets and upholstery is recommended in order to protect the materials.
For aluminium- and zinc surfaces, a dilution with water to 1:30 or lower is recommended.
Multi Clean is also suitable for use in wet extraction devices for carpets.
Low application temperature, energy-saving, water-saving
From renewable raw materials, non-flammable, VOC-free, non-marking
Suitable for the food industry, miscible with water, can be rinsed without residue
Free from / reduced volatile organic compounds according to EU regulation