Bio-Circle uses cookies to ensure the best possible service. If you continue browsing, you agree to the use of cookies. Data protection

Article successfully added.
E-NOX Clean

E-NOX Clean

A00141

Cleaning gel for removing mineral residues 

Water-based, acidic cleaning gel for removing limescale and rust from metal surfaces. Also adheres to perpendicular surfaces. 

  • Brightens stainless steel, aluminium and non-ferrous metals without affecting the basic metal 
  • Contains neither hydrofluoric nor nitric nor hydrochloric acid 
  • VOC-reduced

Product sizes

plastic bottle 1000 ml

plastic jerrican 20 L

Plastic barrel 200 l

plastic jerrican 10 L

Product Details

Highly effective, ready-to-use cleaning gel (can be diluted with water up to 1:40; the gel-like,...more
E-NOX Clean

Highly effective, ready-to-use cleaning gel (can be diluted with water up to 1:40; the gel-like, viscous consistency of the cleaner will decrease as water is added though) for removing mineral residues, such as limescale- and cement residues, extraneous rust, and also light grease- and oil contaminations. Brightens stainless steel, aluminium and non-ferrous metals without affecting the basic metal. Non-corrosive on iron, V2A steel, non-ferrous metals and aluminium; will not dissolve gypsum- and silicate deposits. The cleaning gel adheres very well to perpendicular surfaces, screens, rollers, etc. This way, the active ingredients can work optimally, and the contaminations are dissolved without scrubbing or scouring, and removed without leaving scratches. 

The gel can also be used in the food industry. It can be removed without residues after rinsing with water. According to the German Food, Consumer Goods and Feed Code (LFGB), the cleaner may be used in food-processing companies. It helps fulfil the high demands of the VOC Solvents Directive (DE: 31. BImSchV, AT: VOC-Anlagen-Verordnung – VAV): the limit values do not apply to cleaners with a solvent content of less than 20%. 

  • Water-based, acidic cleaning gel 
  • Removes limescale- and cement residues, extraneous rust, and also light grease- and oil contaminations
  • Can be diluted with water up to 1:40 
  • Brightens stainless steel, aluminium and non-ferrous metals without affecting the basic metal 
  • Removes flash rust from stainless steel 
  • Contains neither hydrofluoric nor nitric nor hydrochloric acid 
  • Non-flammable 

Related links to "E-NOX Clean"

Tips & Hints

E-NOX Clean für Biker: Edelstahlauspuffanlagen, -felgen und -speichen mühelos und schnell reinigen. Aufpinseln, evtl. mit einer Bürste einarbeiten, ca. 10 min einwirken lassen, abspülen, fertig!

Technical specificationmore

Technical specification

Material: Aluminium, Plastics, stainless steel, steel, Tiles
Manual/automatic: manual
NSF-certified: no
VOC content: VOC-reduced
Mechanics: Handreinigung
Check material compatibility: non-ferrous metal, rubber, varnished surfaces, wood
Contamination: limescale, mineral deposits, rust, oxidation, tarnishing
Sicherheitsratschläge: Eye Dam. 1, Met. Corr. 1, Skin Irrit. 2
Label: label-free
Cleaner basis: water-based acidic
Universally applicable in the industry and craft sector  Suitable for the cleaning of...more

Field of application

  • Universally applicable in the industry and craft sector 
  • Suitable for the cleaning of e.g. heating coils, piping, boilers, steam-jet degreasers, washing machines, acid-resistant stone floors and wall tiles 
  • For basic cleaning after mounting stainless steel façade parts, doors, portals, window frames, shop window profiles etc. in order to remove harmful builder’s dirt thoroughly 
  • Maintenance of stainless steel surfaces, in particular in environments prone to accumulation of chlorides and sulphur dioxide (e.g. near the coast) 

Expert tip for bikers: E-NOX Clean for bikers: effortless and fast cleaning of stainless steel exhaust systems, rims and spokes. Brush it on, rub it in with a brush if necessary, and rinse it off after 10 min exposure time. Finished!

E-NOX Clean is a ready-to-use product. The cleaning gel can be diluted with water up to...more

Usage

E-NOX Clean is a ready-to-use product. The cleaning gel can be diluted with water up to 1:40. 

Verfügbare Sicherheitsdatenblätter dieses Artikels. Bitte einloggen.

Datenblätter

Hier stehen nach erfolgreicher Registrierung und Anmeldung unsere aktuellen Sicherheits- und technischen Datenblätter zum Download bereit. Jetzt anmelden >

Viewed

OUR BADGES
Low application temperature, energy-saving, water-saving

Low application temperature, energy-saving, water-saving

From renewable raw materials, non-flammable, VOC-free, non-marking

From renewable raw materials, non-flammable, VOC-free, non-marking

Suitable for the food industry, miscible with water, can be rinsed without residue

Suitable for the food industry, miscible with water, can be rinsed without residue

Free from / reduced volatile organic compounds according to EU regulation

Free from / reduced volatile organic compounds according to EU regulation